Description
Remington cartridge cases are carefully drawn from specially-alloyed brass to provide consistently exact internal volume and resistance to case stretching and brittleness. Primer pocket tolerances are held to .001″, and closely monitored case neck annealing assures easier re-sizing and longer reloading life. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading.
Preparation:
Due to the manufacturing process and/or shipping, case mouths may not be perfectly round. To ensure a round case
mouth, cases must be sized (or have the expander ball of the sizing die run through case neck) and deburred/Chamfered prior
to loading.
Notes:
A light “staining” may be found on the case neck of new brass. This is due to annealing. Annealing is a process, performed
by the manufacturer, which involves rapid heating to a specified temperature followed by rapid cooling. This process imparts
cases with the proper hardness to securely hold a bullet as well as gives flexibility to expand and contract upon firing and
repeated forming. The “staining” is a residue from this process. This stain may be removed by tumbling before loading.
Nickel plated brass is not suitable for case forming as it tends to crack due to hardness greater than standard brass.
Nickel plated brass is harder on reloading dies due to this greater hardness than brass.
Made In United States of AmericaWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov.
Reviews
There are no reviews yet.