Burstfire Case Prep Tool Set P2

Description

Burstfire’s Ultimate Case Prep Tool Set includes all the Case Prep tools you need to do all your basic prepping tasks in one package! Burstfire manufactured these with the highest quality material to ensure long term performance. You will appreciate the clean cuts and performance from these tools! The handle is threaded in the middle, which will allow you to unthreads in the middle to store all the small parts. The thread at each end of the handle will allow you to attach the Case Prep Heads for manual operating. You can also attach the heads atop theBurstfire Case Annealer & Case Prep Center Combo unit (sold separately)?to motorize and speed up the process by at least 5x! This kit allows you to conveniently and efficiently clean primer pockets, debur the inside and outside of your cartridge neck, two at a time by attaching to the handle, or all at once atop the Case Prep Center!?Burstfire Ultimate Small Primer Pocket Reamer is the easiest, fastest, and most effective solution on the market! Normal reamers cut at 35-40 degree angle, which will require excessive metal to be cut for the crimp to be removed. BFG Reamers 80-85 degree angle, to SAAMI dimensions, and requires minimal cutting. Cut radius for these tools is 0.0025 below standard primer dimensions. For small is 0.1730 and 0.209 for large, compared to 0.167 small and 0.202 large for most other products in the market (undersized). The reamer does NOT need to be inserted all the way into the primer pocket. Insert until you feel / hear the cutting, and it should be sifficient! (unless your preference if to open it up a bit more to assist in ease of priming using a hand primer). It is designed to be quick ?tap and go?, and is all you need! It’s like swaging, but better, and faster?The Burstfire VLD Chamfer & Deburr Tool Set is used to chamfer and deburr your case mouth. Chamfer inside case mouth to smooth out rough inner edges from trimming, and allow for smooth bullet seating. Prevents shaving off bullet plating when seating.?Deburr outside case mouth, to remove rough edges / burr from case trimming process. Industry standard 8/32 threaded. Can fit into any prep tool handles, or case prep centers, such as the?Burstfire 2 in 1 Case Annealer & Prep Center.?Like everything Burstfire, the Primer Pocket Uniformer is improved over the rest on the market! All pocket uniformer in the market are made way too small. Result is it creates a circular wobble when attempting to ?uniform? the pocket. Which results in more effort/time to cut and uniform the pocket, evenly.?The Burstfire uniformer is made to the correct dimension, cutting the primer pockets at the correct dimensions in both width and depth, effectively removing that wobble effect, and just enough that it does not remove any metal on the pocket wall. Purpose: Uniform uneven primer pockets, to ensure reliable primer ignition, and/or to prevent the possibility of slam-fire from primer not being seated deep enough. Another use is to remove the protruding flash hole, caused by using incorrect decapping pin on smaller or undersized?flash holes, causing flash hole to be punched outwards, and deformed. Industry standard 8/32 thread can be attached to any prep tool handle, or atop a Case Prep Center.?IncludesVLD Inside Chamfer Tool?Outside DeburPrimer Pocket Reamer?(large & small)Primer Pocket Cleaners (large & small)Uniformer Set